How To Find Ip Address Of Foscam Camera

Foscam IP Camera tool known every bit Equipment Search tool is a software that allows you to find the IP address of a Foscam photographic camera on your local network. Also, you can modify various network settings of Foscam cameras such as change the IP address, change the gateway, the subnet mask, the DNS, http ports etc. You definitely demand this tool in order to set upwards your Foscam photographic camera.
There are a few versions of the Foscam IP camera tool (too known as Equipment Search Tool), ordinarily, the main one works for all types of CCTV IP cameras and Equipment manufactured by Foscam. All the same, they have a few versions for some of their special cameras.

Foscam IP Camera Tool

Below you can download the Foscam IP Photographic camera tool.

Equipment Search Tool V1.0.0.four for Windows (or google drive).
Equipment Search Tool V0.0.0.iv for Mac (or google bulldoze) (or google drive).
Equipment Search Tool for FI86XX model cameras – Windows only (or google drive).
Equipment Search Tool for FN7104W model cameras – Windows only (or google drive).

How to discover out the IP accost of your Foscam photographic camera?

Connect the camera via an Ethernet cable to a LAN port on the router.
Ability on the Foscam camera.
Verify the computer is continued to the aforementioned router.
Standby until the camera completes the self-test. Some models with the vocalisation feature volition announce "Wired connectedness successful."
Launch the IP Photographic camera Equipment Search tool plan.
You should be able to see the camera listed on the IP camera tool software

The tool volition scan your local network and volition listing any Foscam devices (IP camera, NVR) found on the network. Right-click over the IP accost of the photographic camera and the submenu will show upwardly. You can alter the IP address to match that of your network, gateway, subnet mask, etc.
Foscam IP Camera Tool If you double click the IP address, information technology will be directed to the web browser where y'all can access the camera using your username and countersign. Brand sure to install whatever plugins that the camera prompts.

Equipment Search Tool can't observe the Foscam camera

It may happen that the Foscam IP camera tool won't detect whatsoever IP cameras on the network (although you have continued one). There are many factors that can crusade this issue, but the main culprits are various drivers installed in your computer. If yous can't observe the Foscam camera on the software, read the tips below:

Brand sure both camera and computer are connected to the same router (network).
Make sure the camera's status is normal.
Attempt another Ethernet cable or hook into another LAN port on the router.
Make sure the router DHCP server is enabled and there is no Mac address filter.
Login router's spider web page, and check router'south DHCP client list as well, to see if the camera'south IP shows upward there. If yes, delight endeavor to log in to the camera directly by typing the IP address and port on the url address bar. (Default http port: for SD camera is lxxx, for HD camera is 88).

Other possible reasons the IP Search Tool may exist blocked are Windows firewall settings, router firewall settings, anti-virus software, or some other software result.

"Subnet doesn't match" error on IP photographic camera tool

In a few cases while using the Equipment Search Tool newly discovered Foscam cameras will generate an error message subnet doesn't match. This error is usually generated considering the photographic camera and computer do not have an IP address on the same network segment.

This can be caused by the estimator and camera not being continued to the same router or the camera was configured with a different IP address on another router.
Foscam IP Camera Tool Read these tips for a possible solution:

Verify that the photographic camera and figurer are connected to the same router and the router'due south DHCP server is enabled.
Yous may demand to perform a hard reset of the camera. One time completed the camera will obtain a new IP address from the router's DHCP server automatically.
If the higher up steps do not resolve the error assign an IP address for the camera manually.
Verify that the Gateway and DNS server is the router'southward local IP address and the camera'due south IP address should take the first three numbers equally the router'due south IP accost. Case: If the router's local IP accost is 192.168.1.1 so the IP address range of the photographic camera would be 192.168.1.x with x being between 2 – 254. Likewise, the IP address for the camera must be unique (not the aforementioned IP for 2 devices on the network).
Enter the username and password for the camera and click okay. At this betoken, the mistake bulletin should be corrected and the photographic camera should exist displayed with the IP accost you just assigned to it.

Source: https://securitycamcenter.com/foscam-ip-camera-tool-equipment-search-tool/

Posted by: leachcalist.blogspot.com